InfraRed Die Ovens
A Novatec infrared oven dramatically reduces pre-heat time. While a traditional convection oven takes around four hours to heat a typical die for a mid-size press, the infrared oven will bring the same die to temperature in less than an hour.
The fast heat-up increases production flexibility, making it much easier to adjust scheduling. Dies can be placed in the oven much closer to when they’re actually needed, minimizing the time they spend at high heat and thus reducing the potential for oxidization.
Infrared heating also offers an energy savings of greater than 50% over convection heating and when replacing gas heating offers a better than 50% energy savings plus elimination of your greenhouse gas emissions.
Controls:
- Single/Multi Loop(s), auto tune, PID, Microprocessor based with analog output.
- E-Stop.
- Annealing Light(s)
- Temperature display(s).
- Hi-temperature limit mechanical relay(s)
Features:
- Custom Size
- Design and Constructed for long, continuous use
- Single or Multi Chamber(s) available
- Top-loaded or Drawer style for easy loading and unloading.
InfraRed Custom Die Ovens
All of the same Features and Benefits as the Novatec Single Cell Infrared Die Oven but designed for your specific application.
- Cuts die heat-up time by 75%
- Reduces die failure up to 90%
- Reduces energy consumption by 50%
- Eliminates start-up billets
- Eliminates plugged dies
- Almost eliminates die pulls
- Breakthrough pressures drop 30%
- Reduces scrap due to oxidized bearings
- Improves extrusion surface finish
- Single/Multi Loop(s), auto tune, PID, Microprocessor based with analog output.
- E-Stop.
- Annealing Light(s)
- Temperature display(s).
- Hi-temperature limit mechanical relay(s)
InfraRed Single Cell Die Ovens
All of the same Features and Benefits as the Novatec Single Cell Infrared Die Oven but designed for your specific application.
- Cuts die heat-up time by 75%
- Reduces die failure up to 90%
- Reduces energy consumption by 50%
- Eliminates start-up billets
- Eliminates plugged dies
- Almost eliminates die pulls
- Breakthrough pressures drop 30%
- Reduces scrap due to oxidized bearings
- Improves extrusion surface finish
Conventional Ovens
All of the same Features and Benefits as the Novatec Single Cell Infrared Die Oven but designed for your specific application.
Controls:
- Single Loop, auto tune, PID, Microprocessor based with analog output.
- Temperature display.
- Recalculating blower air flow safety switch
- High Temperature Limit Controller
Features:
- Custom Design and Constructed for long, continuous use.
- Modular Construction
- High volume blower for recirculation
- Adjustable air intake and exhaust dampers
Walk-in Ovens
Controls:
- Single Loop, auto tune, PID, Microprocessor based with analog output.
- Temperature display.
- Recalculating blower air flow safety switch
- High Temperature Limit Controller
Features:
- Custom Design and Constructed for long, continuous use.
- Modular Construction
- High volume blower for recirculation
- Adjustable air intake and exhaust dampers
- Doors at each end
KILN Ovens
Controls:
- Single Loop, Ramp Soak, auto tune, PID, Microprocessor based with analog output.
- Temperature display.
- Pneumatic UP/DOWN switch
- High Temperature Limit Controller
Features:
- Custom Design and Constructed for long, continuous use.
- Modular Construction
Conveyor Ovens
Controls:
- Single Loop, auto tune, PID, Microprocessor based with analog output.
- Temperature display.
- Recalculating blower air flow safety switch
- High Temperature Limit Controller
- Variable conveyer speed control
- Object detectors located at entry and exit ends
- E-Stop located at both ends
Features:
- Custom Design and Constructed for long, continuous use.
- Modular Construction
- High volume blower for recirculation
- Adjustable air intake and exhaust dampers
- Multiply heat zones available
- Extended loading and unloading zones
Downloads
IR Die Oven Presentation
This article shows the superiority of the InfraRed technology over convection air flow
Owen Justification
This sample proposal is for a six-chamber single cell die oven to be used for the Sutton Press